Zhejiang Fotech International Co., ltd

Date: 14th September 2016
PVDF Molding Grade
PVDF Molding Grade FTH-213 Characteristic ? ? ?Physical properties Specification ASTM Test standard MFR(g/10min)1?10ASTM D1238, 2300C/12.5kgAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.77?1.79ASTM D792, @23/230CWater absorption (%)?0.05ASTM D570Mechanical properties Tensile yield strength(Mpa)?40ASTM D638 50mm/min@230CYield elongation (%)5-20Tensile strength(Mpa)?35Elongation at break (%)?30Hardness(Shore D)70-80Thermal properties Melting point(0C)165~175ASTM D3418,100C/minProcess safety instructions ? This product should be processed under 370?,to avoid producing toxic gases?? PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds?? Operators should take good care of personal protection during the use procedure and processing.Packaging and storage ? PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum or cardboard.? It must be stored in clean, cool, dry place.